Triwee PLA PRO Filament - 1.75MM - 1KG

Triwee PLA PRO filaments of 1 kg

At Triwee we are experts in 3D technology for domestic and semi-professional use, so, we launch to the market a suitable material of easy use, more resistant than the normal PLA and manufactured in Europe. Low cost, 1 kg and for 1.75 mm nozzles. It is compatible with all FDM printers using this diameter.

Main characteristics of Triwee PLA PRO 1 kg filaments

Based on our experience and knowledge in 3D printers and materials, at Triwee we developed the most resistant polyester filament such as PLA PRO, perfect for the most demanding 3D prints

This filament is composed of microorganisms in lactic acid, which in turn is converted into polylactide that gives it the same ease of use and characteristics as normal PLA but with higher impact resistance, reminiscent of ABS resistance. In 3D printing, the polyamide material is heated until it reaches a liquid state, then it comes out through the nozzle that applies it layer by layer to create the desired object.

PLA PRO is the easiest material to print and allows the most margin for error.

It gives a more matte surface finish quality than our normal PLA

It is less brittle than regular PLA and suitable for post-processing. More reliable than ABS for larger prints, with no delamination or warping

It does not smell bad when printing or produce toxic fumes and compared to other materials, it works at the lowest 3D printing temperature.

PLA PRO from Triwee is available in different colors and with a nozzle diameter of 1.75 mm.

PLA PRO filament should be stored in a dry and clean place and at a temperature between 0 - 20 ºC. Under these storage circumstances, the minimum shelf life of one year.

It has a printing temperature of 220 to 230 ºC and a bed temperature of 60 to 65 ºC