- Pack
Starter Kit Basic
Instead of 44.23
The Starter Kit Basic is a pack consisting of two 1 kg PLA spools and the 3Dlac spray adhesive from Smart Materials. The filaments are compatible with any FDM technology 3D printer with a diameter of 1.75 mm, and the adhesive spray 3DLAC for 3D printing to provide better adhesion on the first layer. Simple handling that will save you time and more than one annoyance on your 3D printing parts.
We guarantee 100% secure payment
Express delivery and perfectly packaged
14 days to return your order
Starter Kit Basic
At Triwee we are experts in 3D technology for home use and if you need a pack for your 3D printers, take advantage of this lot that comes out cheaper. It has what you need, two spools of high quality PLA and the 3DLAC adhesive
Main characteristics of 1kg PLA filaments from Triwee
These filaments are composed of thermoplastic polymers and being natural products, they are biodegradable which means that once discarded, they decompose into their parts in about 6 months
PLA is the easiest material to print and allows the greatest margin of error.
The result it offers is very careful, without appreciating errors or defects in the finish.
It is versatile and can be cut, sanded or drilled. But it is sufficiently resistant.
It does not smell bad when printing or produce toxic gases and compared to other materials, it is the one that works with lower 3D printing temperature.
Nozzle diameter of 1.75 mm.
PLA filament should be stored in a dry and clean place and at a temperature between In these circumstances of conservation, the minimum shelf life of one year.
It has a printing temperature of 180 to 220 ºC and a bed temperature of 50 to 70 ºC
Characteristics of 3DLAC adhesive
Its function is to help hold the first layer of plastic so that it does not move at the start of 3D printing
Compatible with hot beds but can also be used with cold beds.
Thanks to the fixation it provides in the first layer, it avoids the "warping" effect, that is to say, that the piece deforms as it is being built.
It achieves a great holding power as the temperature of the hot bed increases, working very well in the 100 and 110ºC range
When the piece cools down, it can be removed perfectly and without difficulty. It does not contain perfumes or unnecessary additives.
how to use 3DLAC adhesive spray?
The way to apply the 3DLAC lacquer is very simple. It is enough to apply a light spray on the printing base before starting the manufacturing of the part. Once it has cooled, it can be removed without any problem. To clean it, a cloth dampened with water is all that is needed. But 3DLAC allows several uses with a single product saving.